Windows&Games error solution's

Monday, March 11, 2013

Alan Wake all errors solutions

# 1 Can't Fix Tree Flickering problem in Alan Wake (PC)
If you are experiencing this issue, you can use D3DOverrider to force V-sync and Triple Buffering to fix the issue.

# 2 Technical: DEVICE_CREATE_ERROR - Invalid Call Error
The error is associated with your GPU drivers. You should uninstall the drivers completely and do a fresh install. Furthermore, try to use this utility to make sure that the old drivers were uninstalled properly.

# 3 Can't Proceed To The Lighthouse
Few players reported the issue but there is nothing serious here as starting a new game or restarting your PC can fix this issue.

# 4 Alan Wake Command Line Options
You can use these commands to tweak the settings like the motion blur, etc. You can either use them via steam or add them to the target box of the shortcut:
-W screen width (e.g.-w1280)
-H (screen height) (e.g.-h720)
-Window (force windowed)
-Novsync (disables v-sync)
-Showfps (shows a frame rate counter on screen)
-Forcesurround (forces 5.1 speaker mode)
-Forcestereo forces stereo (2 channel) speaker mode
-Nosound (disables sound)
-Cleancloud (deletes your save games and settings for Alan Wake from Steam Cloud)
-Noblur (disables the in-game vector blur)
-Locale = xx (forces a selected locale)
These commands are meant for the advanced users, and if you don't have any idea what to do with them then you should simply tweak the available settings from the in-game options.

# 5 How To Disable Motion Blur in Alan Wake
You can use the following command line to do that:
-Noblur
You can enter the command by right clicking on Alan Wake in the Steam Library and choosing Properties. From there go to "Set launch options.

# 6 Alan Wake Not Responding Error
You should verify the integrity of your files as some files may have been corrupted or missing. If this doesn't help, then first delete AlanWake.exe from Steam \ Steamapps \ common \ Alan Wake \ folder and check the integrity of the files again.

# 7 Alan Wake Doesn't Start - BeginScene failed - Invalid Call Error
You should try to start the game in windowed mode. You can force it to run it in this mode by using "-window" command.

# 8 PC Xbox 360 Controller Not Working
Remedy is aware of the issue which will hopefully be fixed in the upcoming patches. For the time being, you can try this workaround:
Use your mouse / keyboard to enable the vibration from the in-game options instead of using the controller. It seems strange but still may work for you.

Dishonored all errors solutions

# 1 Dishonored - Poor FPS Performance
If you are using SLi / Crossfire and experiencing poor FPS, I will recommend that you turn it off to see the difference.

# 2 Dishonored - Poor Performance / Stuttering
This issue may well be related to Vsync. Try turning it off and you will be able to observe a considerable boost in performance. Disabling the SLi / Crossfire can also resolve the issue for you.

# 3 Dishonored - Game Unavailable / Corrupt game files Error
You just need to restart Steam and log back in to resolve the issue.

# 4 Dishonored - How to Remove Intro Logos
If you are annoyed by the intro logos which appear every time you launch the game; this is what you can do to get rid of them:
Go to C: \ Program Files (x86) \ Steam \ steamapps \ common \ Dishonored \ Dishonored Game \ Movies and delete, move or rename the following:
Legal.bik
LogoArkane.bik
LogoBethesda.bik
UE3_logo.bik
ZenimaxLegal.bik
ZenimaxLegalIFR.bik

# 5 Dishonored Crashes - Stop Responding
If you haven't been able to launch the game and are experiencing constant crashes on launching the game, right click on in Steam, go to properties, and click on 'set launch options'.
In there, enter: 'windowed' without the quotation marks. Change the settings to what your PC can easily run and restart.

# 6 Dishonored - Settings Don't Get Saved
All right, if you can't manage to save the settings in Dishonored and they keep on changing every time you start the game, you can try the following work around:
After changing the in-game settings, minimize the game to windows (Alt + Tab).
Now, you need to find the. Ini and. Inf files for Dishonored and mark them as read-only.
This can make your settings to stick permanently.

Dead space 3 all errors solutions

# 1 Dead Space 3 Not Showing up in My Games
If you are facing this issue, first thing you should do is restart game client. If the problem persists, you need to open your Origin client, go to "My Games" and under the tab "Show:" select "Hidden Games".

# 2 Dead Space 3 Crashes To Desktop
There can be multiple reasons behind a CTD so you can try out the following to fix the issue:
Make sure that your firewall is not blocking the game.
The crash can occur due to the extra peripherals like joypad etc attached to the system and the softwares used by them. Disable / uninstall any controller utility you might have installed to fix the issue.
Make sure that you are using the latest version of the drivers for your sound card and gfx.

# 3 Dead Space 3 Error - Stuck on Scanning DLC
Some of the users have reported the issue and restarting the Origin client seems to have fixed the problem. You can also give it a shot. Reinstalling Origin in the same directory where your games are being downloaded can also fix it.
If the problem persists, you should contact EA advisor for further assistance.

# 4 Dead Space 3 Autosave Problem
Dead Space 3 does not save some of the optional missions. If you are on a side quest, make sure you finish it before quitting out of the game. Seems like a bug and I hope that the issue will be addressed soon by the developer.

# 5 Dead Space 3 - Can't Play Co-op Due to Connection Restriction
If you are unable to host or join in a game, you should forward the following ports:
3659 UDP (if unsure do BOTH UDP and TCP)
9999 UDP (if unsure do BOTH UDP and TCP)

# 6 Dead Space 3 Headphone Sound Issue
If you haven't been unable to listen any sounds via your headphone, you should do the following:
Right click on sound icon in the lower right corner-> click "Playback Devices" -> Right click on "Communications Headphones" in the new pane -> and press disable.

# 7 Dead Space 3 - Error: 262149: -3 While downloading
If you are receiving this error while downloading, you should do the following:
Make sure that you have the latest version of the Origin client running on your PC. You can download and install the latest version from here.
Try forwarding the following ports:
TCP: 80, 443, 9988, 20000-20100, 22990, 17502, 42127
UDP: 3659, 14000-14016, 22990-23006, 25200-25300

Dead space 3 errors Games Errors 0 comments

Crysis 3 all errors solutions

# 1 Crysis 3 Deluxe Edition - Missing Content
If you own a deluxe edition of the game and haven't been able to get access to all the free content that comes with it (Crysis 1 & 2) or you are getting the Hunter edition being displayed instead of the Deluxe edition, don ' t worry about it as EA is aware of the issue and they are trying to sort it out. Meanwhile, just to be on the safe side, I will recommend that you notify support.

# 2 Crysis 3 DirectX Error
Crysis 3 is meant to be run on DirectX 11 supported cards so if you don't own one, this can be the main reason behind the error / crash. If you own a DirectX 11 supported card, make sure you are using the latest version of gfx drivers. Furthermore, try re-installing the directX manually to resolve the issue.

# 3 Crysis 3 Runtime Problem During Installation - Vcredist Error
If you are getting vcredist error during installation, make sure you are installing the correct version (64 or 32 bit).
This will make the error go away and you will be able to install the game just fine.

# 4 Crysis 3 Install Stuck at 25%
I don't know whether the fix will work for you or not but if you get the error during installation, cancel it and try running the setup in the safe mode. General installation errors are usually related to vcredist or directx so re-installing these can also solve the problem for you.

# 5 Crysis 3 Multiplayer Error - Keep Getting Kicked Out
Try restarting your router which fixes the issue usually. If that doesn't work, make sure that the game is not blocked by the firewall / antivirus tool installed on your PC.

# 6 Crysis 3 Error - This Code has already been used
It was a bug at the developer's end. Although the bug has been fixed but if you are still facing the issue even after restarting Origin or resetting the game library, you should contact support.

# 7 Crysis 3 Error Just After Launch
If you have a DirectX 11 supported card and you still are getting the error then try out the following:
Use Optimus, the Nvidia Changer between two graphic cards and set it on maximum power for the exe of crysis 3.

# 8 Crysis 3 - How to Improve Performance
We all know that Crysis games are true test of PC hardware. If you are getting a smooth experience, it's great but if you are having issues and believe that your rig can run the game better then I will recommend you to upgrade your graphics card drivers that have especially been released to boost Crysis 3 performance.

Crysis 3 errors solutions Games Errors 0 comments

Monday, February 11, 2013

World of tanks "The login packet sent to the server was faulty" error solution

Solution

If you are receiving the "The login packet sent to the server was faulty" error message, your game client needs to be updated.

You can download the latest version of the game here
For US http://worldoftanks.com/en/update

For EU http://worldoftanks.eu/en/update

If you are still having difficulties, a clean re-install should clear it right up.
Please follow these steps to ensure that you do a clean install:

1.Uninstall your currently installed client and delete the remaining game folder and its contents (the default location is C:\Games\)

2.Next click on your start menu and in the search/run box type "%appdata%" (without the quotes) and press enter, then in the folder that comes up we would like you to delete the wargaming.net folder. Please also delete your previously downloaded WoT installers.

3.Next, click on your start menu and in the search/run box type "%temp%" (without the quotes) and press enter.
Then delete all of the files in your User's temp folder that come up (some of the files will be in use by Windows and will not let you delete them, just delete the ones you can).

4.Now download a fresh copy of our latest full client from the following link:

For US http://worldoftanks.com/en/update

For EU http://worldoftanks.eu/en/update

5.Lastly, install from the file you just downloaded

Good luck!

world of tanks,wot,world of tanks login error,world of tanks login error solution,world of tanks login error solved

Games Errors world of tanks world of tanks login error world of tanks login error solution world of tanks login error solved wot 0 comments

World of tanks d3dx9_43.dll error solution

"WorldOfTanks.exe - System Error
The program can't start because d3dx9_43.dll is missing from your computer. Try reinstalling the program to fix this problem."

Solution

1. Download this d3dx9_43.dll file.

2. Search for WorldofTanks.exe inside game installation directory and paste the d3dx9_43.dll file in the same directory where WorldofTanks.exe is.

3. Double click WorldofTanks.exe to play the game without any error.

You could also try to download and install DirectX again.

Download DirectX

The step written above works well on Windows XP and Windows 7. This step is also one of the safest and effective method to fix d3dx9_43.dll missing error for playing World of Tanks on PC.

Good luck!

d3dx9_43.dll, missing d3dx9_43.dll file error, d3dx9_43.dll World of Tanks, WorldofTanks.exe error

Games Errors world of tanks world of tanks error 0 comments

Tuesday, February 5, 2013

Xbox 360 error codes explanation

Explanation of Error Codes

Call the Customer Care Number With No error is one of the following errors, but the Xbox does not know which one of your own is a box opening 39XX bios / kernel (with 4034 Microsoft added the error number) You can send them to us to fix or try the following decisions for errors and see what is yours.

Call Customer Service error-free number, but only occurs when trying to load a game or access menu items from the dashboard (never booting up) call 1800-4MY-Xbox, will give you a code to enter via a controller to reset the system.

Description:
When you try to start a "one should" message comes up, and has a number of style LED in the upper left corner. Here is what I mean.
Disclaimer:
This information is believed to be correct, it should be as close as possible.
Also:
Bootloader things you should never see, because if kernel does not boot. (So you see no messages)
Who defines that code - Description
0 - any - No error (duh)
1 - bootldr - Unknown exactly, something to do with the control of the parent
2 - bootldr - Eeprom check failed
3 - bootldr -; / not used
4 - bootldr - Ram check failed
5 - kernel - HDD not locked (retail BIOSes require the hd to be locked)
6 - kernel - Can not unlock HDD
7 - kernel - HDD timeout
8 - kernel - HDD not found
9 - kernel - HDD parameters (PIO / DMA / or size {} debug, some minimum size required for debug)
10 - kernel - DVD timeout
11 - kernel - DVD Not Found
12 - kernel - DVD parameters (PIO / DMA)
13 - kernel - Dashboard launch fail (due to missing / bad key, or anything else that would prevent it from running) and the dashboard did not specify why failed.
14 - dashboard - Error loading dashboard (dashboard generic error)
15 -; / Not used
16 - dashboard - Other files to do with dashboard / dashboard settings (specific dashboard error)
17 -; / Not used
18 -; / Not used
19 -; / Not used
20 - kernel - The dashboard was attempted to load and failed; It was a cold boot, and the dashboard did not specify why failed, but (for some reason) needed to be noted that the dvd passed the challenge / response authentication
21 - anywhere - This error says that the machine had begun to display a error, basically someone told the machine to reboot (or launch a xbe) with this flag, and the error code means that once you reboot the flag.

67M2U5N76DZD